A flagstick is a small target, and it often sits in front of trees, a hillside, or other objects that can return a laser reading of their own. Pin mode — also called flag lock — is the function that tries to give you the distance to that nearer, smaller target and confirm the lock. This article explains how that works on the ZYDAR Z1 and the ZYDAR Pro Z1, using the live product pages and the official user manuals on zydar.com, fetched November 16, 2026. It is a how-to based on those sources, not a claim about every rangefinder on the market.
What pin mode is for
In ordinary distance mode, a laser rangefinder reports the distance to the object the beam hits. If a tree, a mound, or a background object is in the same line of sight as the flag, that farther object can be what you actually measured. The official Z1 and Pro Z1 user manuals say pin mode should be used when measuring the distance of small targets such as a flagstick.
On the ZYDAR product pages, PIN mode is described this way: when the laser beam scans over two or more objects, such as a flagpole and a tree, the distance to the nearest object (the flagpole) is displayed. At the same time, the unit vibrates, and a sudden change in the flashing of a flag on the screen indicates that the distance to the flagpole is locked. The Pro Z1 specification table puts it more briefly: PIN mode locks the nearer object (the flag) with vibration and an on-screen flag indicator.
How to use PIN mode on the Z1 and Pro Z1
The English user manuals for both models give the same operating steps:
- Activate pin distance measurement by holding down the Power / Measurement button.
- A successful pin-distance reading is confirmed by vibration and the flag icon blinking twice.
Both manuals also list a pin mode icon in the display. If a distance does not come back, the troubleshooting section tells you to confirm that the device is set to the intended standard or pin mode, to check that nothing is blocking the lens (such as leaves, branches, or a finger), and to remember that dark or moving targets, reflective surfaces, small targets, glass, backlit targets, and weather such as fog or rain can affect a reading.
The basic aiming steps are the same as any other laser reading: look through the 7x optic, aim at the flag, and take the measurement. The difference in pin mode is that you hold the Power / Measurement button and wait for the vibration and flag-icon confirmation before you trust the number.
If you are taking a rangefinder out for your first round, that same hold-the-button pin-mode step sits in a full setup-to-first-reading walkthrough in How to Use a Golf Rangefinder: Step-by-Step for Your First Round.
Flag range versus overall range
This is the distinction many product pages leave easy to miss. On both the Z1 and Pro Z1 product pages, the overall measuring range is listed as 5 to 1,300 yards, with a flag range of up to 300 yards and a measurement speed of 0.3 seconds. Accuracy is listed as ±1 yard, as a manufacturer specification. Units can be set to yards or meters. The official manuals use the same yard figures: a range of 5–1,300 yards, and a range to flag of 300 yards.
In other words, a 1,300-yard maximum range is not the same thing as a 1,300-yard flag lock. For a flagstick, the stated flag range is up to 300 yards. If you are ranging a larger target, such as a tree line or a hazard edge, the wider 5–1,300 yard window is the relevant manufacturer specification. The manuals also note that the devices cannot measure a distance below 5 yards or over 1,300 yards.
What pin mode does not do
Pin mode chooses which object the distance applies to. It does not adjust that distance for elevation. Slope compensation is a separate function. Both the Z1 and the Pro Z1 have an external slope on/off switch, which the product pages list independently of PIN mode. If you are playing a competition that allows distance-only devices, switch slope off and confirm it is off before you start; see Are Slope Rangefinders Legal in Tournaments? and How to Use a Slope Rangefinder (and When to Turn Slope Off).
The two models share the same stated PIN mode behavior, ranging package, and external slope switch. The main difference is the display: the Z1 uses a red OLED display, and the Pro Z1 uses a dual-color OLED display (black for typical lighting, red for low light). For a fuller comparison, see Z1 vs Pro Z1.
Both product pages also list a magnetic grip, or magnetic cart grip, for attaching the unit to a golf cart or a club between shots. That is a carrying feature; it does not change how pin mode locks a target.
FAQs
What is pin mode on a golf rangefinder?
Pin mode, or flag lock, is the function used when you want the distance to a small target such as a flagstick. On the ZYDAR Z1 and Pro Z1, when the laser scans two or more objects, PIN mode displays the distance to the nearer object and confirms the lock with vibration and an on-screen flag indicator.
How do I turn pin mode on?
The official Z1 and Pro Z1 user manuals say to activate pin distance measurement by holding down the Power / Measurement button. Wait for the confirmation signals before you use the number.
How do I know the flag is locked?
The product pages say the unit vibrates and a flag on the screen flashes to indicate that the distance to the flagpole is locked. The manuals describe the same confirmation as vibration and the flag icon blinking twice.
How far can flag lock work?
The Z1 and Pro Z1 product pages and user manuals list a flag range of up to 300 yards. The overall measuring range is listed as 5 to 1,300 yards. Those figures are manufacturer specifications. A longer overall range does not mean the flag can be locked at 1,300 yards.
Is pin mode the same as slope?
No. Pin mode is about which target the distance applies to. Slope compensation adjusts a distance for elevation and is controlled by a separate external on/off switch on both ZYDAR models. For tournament play, check the local rules and turn slope off when a distance-only device is required.