A magnetic grip lets you park a laser rangefinder on a golf cart between shots, instead of leaving it in a cup holder or a bag. Both the ZYDAR Z1 and the ZYDAR Pro Z1 include this feature. This article explains what the official product pages and user manuals say about that magnet, how to use it on a cart, and the safety notes that come with it. It is based on the live zydar.com product pages and the official user manuals on zydar.com, fetched November 16, 2026, not a claim about every rangefinder on the market.
What a magnetic cart grip is
On both the Z1 and Pro Z1 product pages, the feature is listed as Magnetic Grip in the product highlights and as Magnetic Cart Grip in the specification table, with the line “For Easy Cart Access.” The page copy says the rangefinder “ensures easy connection to golf clubs or carts, preventing accidental drops or damage.” The Pro Z1 specification table also describes the magnetic grip with the words “Attaches to a golf cart or club.”
The official English user manuals use a shorter description: the magnet allows the laser rangefinder “to be conveniently attached to metal surfaces and golf carts.” The rangefinder diagrams in both manuals label the magnet as item 8, on the side of the housing.
The magnet is a carrying feature. It does not change how the unit measures a target, and it is separate from PIN mode and from the external slope switch.
How to attach it to a golf cart
The product pages and manuals do not name a specific bar or mounting point on a cart, and they do not publish a step-by-step mounting sequence. They do say the unit attaches to metal surfaces and golf carts. Using those official descriptions, a careful way to park the unit is:
- Choose a clean, bare metal surface on the cart that you can reach easily, and where the unit is less likely to be knocked by a bag, a seat, or a passing branch.
- Place the magnet side of the housing against that surface. The official diagrams show the magnet on the side of the unit.
- Confirm that the rangefinder is seated and holding before you take your hand away.
- When you need a distance, take the unit off the cart, take the reading, and return it to the same metal surface if you want it parked again.
Not every part of a cart is metal, and a loose or poorly seated hold is not a secure mount. If the unit does not hold firmly, choose a different metal surface rather than forcing it. Keep the lenses clear of dirt, floor mats, and other contact while the unit is parked.
Attaching it to a golf club
Both product pages also mention a connection to golf clubs, not only to carts. The manuals’ wording is “metal surfaces and golf carts.” The same basic rule applies: use a metal surface, seat the magnet firmly, and confirm the hold before you let go. This is still a carrying feature, not a way to range a target hands-free.
Safety notes from the official manuals
Both the Z1 and Pro Z1 English user manuals include a section titled “NOTES ON MAGNETS.” Those notes should be read before you use the magnet around people or cards:
- The magnet “may cause malfunction or accidents of electronic medical devices such as cardiac pacemakers.”
- “Do not place the range finder near hard drives, credit cards, magnetic tapes, debit cards, television tubes, etc. Magnets in rangefinders can affect or even destroy recorded data.”
Keep the rangefinder away from payment cards, hard drives, and the other items named in that list, including when it is parked on a cart or attached to a club.
What the magnet does not do
The magnetic grip does not take a distance for you, and it does not replace PIN mode or slope control. To lock a flag, you still take the unit in hand and use PIN mode; see What Is Pin Mode on a Golf Rangefinder?. Slope compensation remains a separate function, controlled by the external on/off switch on both models; see How to Use a Slope Rangefinder (and When to Turn Slope Off).
The two models share the same stated magnet behavior. The main difference between them is the display: the Z1 uses a red OLED display, and the Pro Z1 uses a dual-color OLED display (black for typical lighting, red for low light). For a fuller comparison, see ZYDAR Z1 vs Pro Z1: Which Golf Rangefinder Should You Buy?.
FAQs
Do the Z1 and Pro Z1 have a magnetic cart grip?
Yes. The live Z1 and Pro Z1 product pages both list Magnetic Grip in the highlights and Magnetic Cart Grip in the specification table. The official user manuals for both models include a magnet and say it allows the rangefinder to be attached to metal surfaces and golf carts.
Where is the magnet on the rangefinder?
The official rangefinder diagrams in the Z1 and Pro Z1 user manuals label the magnet as item 8, on the side of the housing.
What can I attach it to?
The manuals say metal surfaces and golf carts. The product pages also mention easy connection to golf clubs or carts, and the Pro Z1 specification table says the magnetic grip attaches to a golf cart or club. Confirm that the surface is metal and that the unit is firmly seated before you let go.
Are there safety precautions for the magnet?
Yes. Both official user manuals warn that the magnet may cause malfunction or accidents of electronic medical devices such as cardiac pacemakers, and that you should not place the rangefinder near hard drives, credit cards, magnetic tapes, debit cards, television tubes, and similar items, because the magnet can affect or even destroy recorded data.
Does the magnet change how the rangefinder measures distance?
No. The magnet is a carrying feature. PIN mode and the external slope switch are separate functions and work the same way whether the unit was just taken off a cart or out of a case.
Related reading
- What Is Pin Mode on a Golf Rangefinder? Flag Lock and Vibration Explained
- How to Choose a Golf Rangefinder: 7 Specs That Actually Matter
- Golf Rangefinder Battery Guide: CR2 Life, Replacement and Cold-Weather Tips
- ZYDAR Z1 vs Pro Z1: Which Golf Rangefinder Should You Buy?
- How to Use a Slope Rangefinder (and When to Turn Slope Off)