Envío gratis + Devoluciones gratuitas de 30 días + Garantía de 2 años

How to Practice Distance Control at the Range with a Rangefinder

Distance control at the range means comparing your shots with a known number to a target you can see, instead of guessing how far that flag or marker is. A laser rangefinder such as the ZYDAR Z1 or the ZYDAR Pro Z1 measures the distance to the object you aim at. This article explains how to use that number in a simple practice loop. It is based on the live zydar.com product pages and the official user manuals on zydar.com, fetched November 16, 2026. It is not a claim that practice with a rangefinder will save a set number of strokes, and it is not a ranking of every model on the market.

Why use a laser at the range

A laser rangefinder returns a distance to a specific target: a range flag, a yardage sign, or another object you can see through the optic. That is different from relying on a painted marker, which may not sit at the same spot as the flag you are actually aiming at. Both the Z1 and the Pro Z1 are listed with 7x magnification, a range of 5 to 1,300 yards, a flag range of up to 300 yards, and +/- 1 yard accuracy as a manufacturer specification. Measurement speed is listed as 0.3 seconds, also a manufacturer specification. Most driving-range flags sit inside that 300-yard flag range.

The official manuals also say pin mode should be used when measuring the distance of small targets such as a flagstick, and that the units cannot measure below 5 yards or over 1,300 yards.

How to get a reliable number

Use pin mode, not a quick press at a crowded background. On both official product pages, PIN mode works this way: when the laser beam scans over two or more objects, such as a flagpole and a tree, the distance to the nearest object (the flagpole) is displayed. A vibration and a sudden change in the flashing of a flag on the screen indicate that the distance to the flagpole is locked.

The official English user manuals give the control sequence:

  • Press the Power / Measurement button to turn the unit on.
  • Hold down the Power / Measurement button to activate pin distance measurement.
  • Wait until pin distance acquisition is confirmed by vibration and the flag icon blinking twice.

Aim at the flag or marker you intend to use as your target, keep the unit steady, and write down or remember that number before you hit the shot. For a fuller walkthrough of pin mode, see What Is Pin Mode on a Golf Rangefinder?.

A simple distance-control loop

The product pages and manuals do not prescribe a range-practice routine. Using only how the devices measure a target, a careful loop looks like this:

  • Pick one clear target, such as a range flag, that sits within the stated flag range of up to 300 yards.
  • Range it in pin mode and note the number. If the unit does not lock, pick a more visible target or wait until the flag is not hidden by other objects. The manuals say a rangefinder may fail to measure when the target is obscured.
  • Hit a small group of shots with one club, and compare where the balls finish relative to that target and that number.
  • Repeat with the same club, or switch to another club and range the same target again if you want a fresh number.

The point of the loop is to pair a club with a measured distance, not to invent a new “true” yardage for the range. If you change targets, range the new one. The 7x optic is there to help you see the target you are aiming at; it does not change the measurement itself.

Slope on or off at the range

Both models have an external slope switch. With slope on, the unit provides a straight-line distance and a slope-compensation, or “plays-like,” distance. With slope off, it provides the straight-line distance only. If you are practicing to a straight-line number, turn the slope switch off so the figure you write down is the line-of-sight distance. If you want the compensated number on a downhill or uphill bay, turn slope on and use that compensated figure, not both numbers at once.

The slope switch is a separate control from pin mode. For how the switch works and when tournament rules require slope off, see How to Use a Slope Rangefinder (and When to Turn Slope Off).

Z1 and Pro Z1 at the range

The two models share the same stated ranging behavior, pin-mode controls, flag range, and external slope switch. The main difference is the display: the Z1 uses a red OLED display, and the Pro Z1 uses a dual-color OLED display (black for typical lighting, red for low light). For a side-by-side, see ZYDAR Z1 vs Pro Z1: Which Golf Rangefinder Should You Buy?.

FAQs

Can I use a rangefinder at the driving range?

Yes, as long as you can see a target and it is within the unit’s stated range. On the Z1 and Pro Z1, the overall range is 5 to 1,300 yards, and the flag range is up to 300 yards, as listed on the live product pages and in the official manuals. Use pin mode for small targets such as a flagstick.

How do I lock a range flag?

Hold down the Power / Measurement button to activate pin mode. The official manuals say acquisition is confirmed by vibration and the flag icon blinking twice. The product pages describe the same lock as a vibration and a flashing flag on the screen when the laser sees more than one object and displays the nearer one.

Should slope be on or off when I practice?

It depends on the number you want. Slope off is the straight-line distance. Slope on also provides a slope-compensation distance. If you want to pair a club with a line-of-sight number, turn slope off. The external switch on the Z1 and Pro Z1 controls this.

What if the rangefinder will not give a number?

The official manuals say a rangefinder may fail to measure when the target is obscured by other objects, and that the units cannot measure below 5 yards or over 1,300 yards. Confirm that you are in pin mode, that the target is visible, and that it sits inside the stated range, then try again.

Do the Z1 and Pro Z1 measure differently at the range?

No. Both are listed with the same 7x magnification, 5 to 1,300 yard range, up to 300 yard flag range, +/- 1 yard manufacturer accuracy, 0.3-second measurement speed, pin mode, and an external slope switch. The published difference is the display: red OLED on the Z1, and a dual-color OLED on the Pro Z1.

Related reading

Deja un comentario

Por favor, ten en cuenta que los comentarios deben ser aprobados antes de ser publicados